TM38-157_hinten
TM38-157_vorne
TM38-157_links
TM38-157_rechts
Preview: TM38-157_hinten
Preview: TM38-157_vorne
Preview: TM38-157_links
Preview: TM38-157_rechts
Mikuni carburettor TM38-157 (2 pieces) Powerjet Yamaha Banshee RD 350 and others
(Product No.: 99167)
TM38-157_hinten
TM38-157_vorne
TM38-157_links
TM38-157_rechts
Mobile Preview: TM38-157_hinten
Mobile Preview: TM38-157_vorne
Mobile Preview: TM38-157_links
Mobile Preview: TM38-157_rechts
wishlist Add to wish list

Mikuni carburettor TM38-157 (2 pieces) Powerjet Yamaha Banshee RD 350 and others

Shipping time:
2-5 days 2-5 days (abroad may vary)
-5%
Only 532,00 EUR
532,00 EUR per Pcs

incl. 19% tax excl. Shipping costs

Ask about product
Description
Mikuni carburettor TM38-157

The carburettors are often used for a conversion of the Yamaha Banshee or RD350.

The carburettors have an additional Powerjet jet so that the mixture can be adjusted even better.

The offer includes:
2x carburettor TM38-157
(jetting of your choice (standard jetting if not specified))
Normally, the nozzles and the nozzle needle are replaced. All we need is your setup. Simply contact us or make a note during the ordering process.

Technical details:

Main jet = 410
Idle jet = 20
Jet needle = 6EJ12-56-3
Power Jet nozzle = 50

Outer diameter front = 44mm
Outer diameter rear = 62mm
Total length = 76mm

Important notes:
Other intake manifolds are required! No plug & play!
Matching intake manifolds are also available from us!

Conversion must be approved by the TÜV

Suitable for:
Yamaha Banshee
Yamaha RD 350 31k, YPVS, 1WW, 1WX, 4L0, 4L1 etc.
Customer reviews
0,0

Unfortunately there are no reviews yet. Be the first who rates this product.

Your opinion

Hersteller Informationen

Mikuni
Mikuni Vergasertechnik Zur Quellge 11 32351 Stemwede


Importeur / EU-Wirtschaftsakteur

Ramon Eid und Philipp Böhm GbR Waldstrasse 1 DE-56459 Kölbingen

This product is compatible with (for example):

PR_Intake_TM38-157
TOP
-4%
PR CNC Intake manifold Intake manifold Yamaha...
MADE IN GERMANY

PR intake manifolds for the Yamaha Banshee or RD 350 for use with Mikuni TM38-157 Powerjet carburetors


The offer includes:
2x intake manifolds incl. Mikuni flange rubber
8x screws incl. washers

Optional:
2x gasket diaphragm inlet standard
2x gasket diaphragm inlet for V-Force 4
From only 209,00 EUR
Silikonschlauch_62mm
Silicone hose connector connection air filter...
Silicone hose connector for connecting a Mikuni TM35-1 or TM38 carburettor to the original air filter box

Includes:
2x silicone hose reducer

Dimensions:
62mm on both sides

Suitable for:
Yamaha Banshee all years
20,00 EUR
20,00 EUR per Pcs
Synchrometer_STE_BK1-35
Carburettor synchronisation tester Flow Meter...
Carburettor synchronisation tester Flow Meter Synchrometer Synchronisation aid Volume flow measurement

This tool helps you to synchronise your carburettor without any problems, i.e. to adjust it evenly. Which can otherwise be a real pain. An indispensable companion for your Banshee or RD 350!

Includes:
1x synchronisation tester

Info:
The synchronisation tester should always be used when you have worked on the carburettors, throttle cables or in the area of the throttle cables to ensure that the carburettors are running in sync.
Cleanly synchronised carburettors are the be-all and end-all for these engines. Poorly adjusted carburettors mean loss of power and, in the worst case, engine damage!

Suitable for:
Yamaha Banshee all years of construction
Yamaha RD all years and models

Can of course also be used for other vehicles!
69,00 EUR
69,00 EUR per Pcs
4/042#
TOP
Mikuni carburettor main jet hexagonal 4/042#Size...
Mikuni carburettor main jet hexagonal 4/042#xxx

Scope of delivery:
1x main jet of your choice


Suitable for:
Yamaha Banshee original carburettor

Mikuni VM carburettor
Mikuni TM carburettor
Mikuni TMX carburettor
5,20 EUR
5,20 EUR per Pcs
VM22/210
TOP
Mikuni carburettor idle jet VM22/210-size...
Mikuni carburettor idle jet VM22/210-size

Scope of delivery:
1x idle jet of your choice

Suitable for:
Mikuni VM carburettor
Mikuni TM carburettor
Mikuni TMX carburettor

(NOT SUITABLE FOR THE ORIGINAL CARBURETTORS OF THE RD OR BANSHEE!)
5,00 EUR
5,00 EUR per Pcs
N102221
TOP
Mikuni carburettor Powerjet jet N102221 size...
Mikuni carburettor idle jet VM22/210-size

Scope of delivery:
1x idle jet of your choice

Suitable for:
Mikuni VM carburettor
Mikuni TM carburettor
Mikuni TMX carburettor
5,00 EUR
5,00 EUR per Pcs

This product is similar to:

Silikonschlauch_62mm
Silicone hose connector connection air filter...
Silicone hose connector for connecting a Mikuni TM35-1 or TM38 carburettor to the original air filter box

Includes:
2x silicone hose reducer

Dimensions:
62mm on both sides

Suitable for:
Yamaha Banshee all years
20,00 EUR
20,00 EUR per Pcs
E-ATV upper rod end for the Yamaha Raptor - Y000111
E-ATV upper rod end for the Yamaha Raptor...
E-ATV upper rod end for the Yamaha Raptor - Y000111

Includes:
1x upper rod end


Suitable for:
Yamaha Raptor E-ATV A-Arms
32,00 EUR
32,00 EUR per Pcs
Cheetah_421
Cylinder kit Cheetah Cub Serval 421 Plug...
This is the legendary CHEETAH CUB kit for YOUR Banshee

The offer is valid for a complete Cheetah cylinder kit 421cc incl. all necessary components.


Scope of delivery:
1x Cheetah cylinder 421cc as Cub
2x Wiseco pistons 67.94mm
1x base gasket
2x stud bolt extensions
As well as water plugs and 2 small nuts for between the cylinders

Crankshaft sold separately!
Cylinder head available separately!

For further parts or information, please contact us.
2.639,00 EUR
2.639,00 EUR per Pcs
PR_Intake_TM38-157
TOP
-4%
PR CNC Intake manifold Intake manifold Yamaha...
MADE IN GERMANY

PR intake manifolds for the Yamaha Banshee or RD 350 for use with Mikuni TM38-157 Powerjet carburetors


The offer includes:
2x intake manifolds incl. Mikuni flange rubber
8x screws incl. washers

Optional:
2x gasket diaphragm inlet standard
2x gasket diaphragm inlet for V-Force 4
From only 209,00 EUR