Carburettor synchronisation tester Flow Meter Synchrometer Synchronisation aid Volume flow measurement for Mikuni, Keihin, Polini, Lectron etc.

Silicone hose connector for connecting a Mikuni TM30 carburettor to the original air filter box

Includes:
2x silicone hose reducer

Dimensions:
51mm carburettor connection
62mm air filter connection

Suitable for:
Yamaha Banshee all years

Silicone hose connector for connecting a Mikuni TM35-1 or TM38 carburettor to the original air filter box

Includes:
2x silicone hose reducer

Dimensions:
62mm on both sides

Suitable for:
Yamaha Banshee all years

Mikuni carburettor TM30-6

The carburettors are often used for a conversion of the Yamaha Banshee or RD350. They fit tightly into the original intake rubber.

The carburettors have an additional Powerjet jet so that the mixture can be adjusted even better.

The offer includes:
2x carburettor TM30-6
(jetting of your choice (standard jetting if not specified))

Technical data:
Hauptdüse = 195
Leerlaufdüse = 40
Düsennadel = 5EL68-3
Power Jet Düse = 80

Notes:
To make the carburettor fit more snugly, we recommend fitting a spacer between the diaphragm and cylinder. Otherwise it will be a little tight on the engine housing.

Conversion must be approved by the TÜV

Optional oil connection:
Also available with oil connection! (The carburettors then have an oil connection with integrated non-return valve)

Suitable for:
Yamaha Banshee
Yamaha RD 350 31k, YPVS, 1WW, 1WX, 4L0, 4L1 etc.

Mikuni carburettor TM35-1

The carburettor is also often used for conversion on other mopeds and scooters, such as Vespa, Aprilia RS, Suzuki RGV, Yamaha TZR etc.

The offer includes:
1x carburettor TM35-1

The offer also includes:
Jetting of your choice (standard jetting if not specified)
A different jet needle (if required) (standard if no details are given).

Technical details:

Main jet = 350
Idle jet = 20
Nozzle needle = 6EN11-53-3

Outer diameter front = 40mm
Outer diameter rear = 62mm
Total length = 74mm

Important notes:
Other intake manifolds are required! No plug & play!

Conversion must be approved by the TÜV

Suitable for:
All two-stroke vehicles where it fits or can be made to fit! :)

Keihin Air Striker carburettor 38mm

The carburettors are often used for a conversion of the Yamaha Banshee or RD350.

The offer includes:
1x Keihin PWK Air Striker 38mm carburettor

Technical details:

Flow: 38 mm
Main jet: 170
Idle jet: 55
Needle: 48-DDJ

Outer diameter front = 45mm
Outer diameter rear = 63mm


Important notes:
Other intake manifolds are required! No plug & play!

Conversion must be approved by the TÜV

Suitable for:
Yamaha Banshee
Yamaha RD 350 31k, YPVS, 1WW, 1WX, 4L0, 4L1 etc.

Mikuni carburettor TM35-1

The carburettors are often used for a conversion of the Yamaha Banshee or RD350.

The offer includes:
2x carburettor TM35-1
(jetting and needle of your choice (standard jetting if not specified))

The offer also includes:
Jetting of your choice (standard jetting if no details are given)
A different nozzle needle (if required) (standard if no details are provided.

Normally, the nozzles and the nozzle needle are replaced. All we need is your setup. Simply contact us or make a note during the ordering process.

Swingarm pin complete repair kit All Balls 28-1028 Yamaha Banshee

Includes:
1x sleeve
2x dust cap
2x needle bearing
2x disc

Info:
Repair kit for the swingarm if it is worn out or the bearings are simply defective.

Suitable for:
Yamaha Banshee (all)
 

Lock washer clutch nut Yamaha Banshee RD 350 90215-20223-00

Contains:
1x lock washer

Info:
Secures the clutch nut

Quantity required:
1x disc

Suitable for all Yamaha Banshee model years
Suitable for all RD 350 models 31k, YPVS, 1WW, 1WX