Other accessories

Other accessories

Other accessories - Everything that does not fit into any other category

Bosch_LSU_4.9
TOP
Lambda sensor LSU 4.9 BOSCH e.g. as a replacement for our AEM X-Series Lambda Tool
Lambda sensor LSU 4.9 BOSCH

Contains:
1x Bosch LSU4.9 lambda sensor
179,00 EUR
179,00 EUR per Pcs
incl. 19% tax excl. Shipping costs
30-4005
Steel threaded socket for lambda sensors for welding in 30-4005 e.g. for Bosch LSU 4.9
Steel threaded socket for lambda sensors for welding 30-4005 e.g. for Bosch LSU 4.9

Includes:
1x weld-in sleeve for sensors with M18x1.5
9,50 EUR
9,50 EUR per Pcs
incl. 19% tax excl. Shipping costs
50412700
Steel threaded socket set (3-piece) for lambda sensors for welding in, e.g. for Bosch LSU 4.9
Steel threaded socket set for lambda sensors for welding in, e.g. for Bosch LSU 4.9

Includes:
1x weld-in socket for sensors with M18x1.5 / H 14.5 mm Ø 22/24 mm
1x seal
1x screw plug
10,00 EUR
10,00 EUR per Pcs
incl. 19% tax excl. Shipping costs
93507-32031-00 + 90152-06010-00 + 93210-14-369-00 + 90501-12081-00
Kickstarter repair kit Yamaha Banshee (4-piece)
Kickstarter repair kit Yamaha Banshee (4-piece)

Is your kickstarter rattling, rattling and ringing? Then this repair kit should help! The kit contains all the parts you need for a repair and usually solves the problem.

Includes:
1x O-ring
1x countersunk screw
1x ball
1x spring

Suitable for:
Yamaha Banshee all years
15,00 EUR
15,00 EUR per Pcs
incl. 19% tax excl. Shipping costs
Procom_PE-C-AY350B-A
TOP
Procom CDI Yamaha Banshee new plugs (from 1994) PE-C-AY350B-A (B) Tuning CDI with different ignition curves
Procom CDI Yamaha Banshee new plugs (from 1994) PE-C-AY350B-A Tuning CDI with different ignition curves

If you are looking for an inexpensive and good alternative without great expense, this CDI is a good choice. Compared to the original CDI, it offers a good increase in performance and is also cheaper than the original. Furthermore, this CDI is Plug&Play! The 10 pre-programmed ignition curves can be easily selected via a potentiometer. The original ignition curve is also included.

Manufacturer's description:
The PROCOM Map Switching Performance CDI for the Yamaha YFM350 Banshee (87-94) increases the rev limit by 1,000 RPM compared to the standard rev limit. In addition, this unit offers 10 newly mapped control curves that provide a noticeable increase in power and torque over the stock CDI.

This CDI box is a direct plug-in replacement. Simply remove the standard CDI and plug the Procom unit directly into the wiring harness, no modification required. Suitable for stock and modified bikes.

Includes:
1x Procom CDI PE-C-AY350B

Info:
Compare connector plugs!

Suitable for:
Yamaha Banshee from model year 1994 (square connector)
180,00 EUR
180,00 EUR per Pcs
incl. 19% tax excl. Shipping costs
Synchrometer_STE_BK1-35
Carburettor synchronisation tester Flow Meter Synchrometer Synchronisation aid Volume flow measurement for Mikuni, Keihin, Polini, Lectron etc.
Carburettor synchronisation tester Flow Meter Synchrometer Synchronisation aid Volume flow measurement

This tool helps you to synchronise your carburettor without any problems, i.e. to adjust it evenly. Which can otherwise be a real pain. An indispensable companion for your Banshee or RD 350!

Includes:
1x synchronisation tester

Info:
The synchronisation tester should always be used when you have worked on the carburettors, throttle cables or in the area of the throttle cables to ensure that the carburettors are running in sync.
Cleanly synchronised carburettors are the be-all and end-all for these engines. Poorly adjusted carburettors mean loss of power and, in the worst case, engine damage!

Suitable for:
Yamaha Banshee all years of construction
Yamaha RD all years and models

Can of course also be used for other vehicles!
69,00 EUR
69,00 EUR per Pcs
incl. 19% tax excl. Shipping costs
Silikonschlauch_51-62mm
Silicone hose connector reduction connection air filter box e.g. f. Mikuni TM30 carburettor (51/62mm)
Silicone hose connector for connecting a Mikuni TM30 carburettor to the original air filter box

Includes:
2x silicone hose reducer

Dimensions:
51mm carburettor connection
62mm air filter connection

Suitable for:
Yamaha Banshee all years
30,00 EUR
30,00 EUR per Pcs
incl. 19% tax excl. Shipping costs
Silikonschlauch_62mm
Silicone hose connector connection air filter box e.g. f. Mikuni TM35-1 or TM38 carburettor (62/62mm)
Silicone hose connector for connecting a Mikuni TM35-1 or TM38 carburettor to the original air filter box

Includes:
2x silicone hose reducer

Dimensions:
62mm on both sides

Suitable for:
Yamaha Banshee all years
20,00 EUR
20,00 EUR per Pcs
incl. 19% tax excl. Shipping costs
Dynatek_DCK7-4
TOP
Dynatek ignition coil DCK7-4 f. Yamaha Banshee or RD 350 High Power ignition coil Dual ignition coil
Dynatek ignition coil DCK7-4 for the Yamaha Banshee or RD 350

Includes:
1x ignition coil incl. ignition cable without spark plug connector

Description:
Compared to the original ignition coil, this ignition coil offers a stronger ignition spark and therefore better engine running

To be connected like the original ignition coil

Fitting instructions:
Fits 1:1 to the original mounting points

Suitable for all model years

Comparison numbers:
2GU-82310-50-00
2GU-82310-51-00
3LC-82310-00-00
3XC-82310-01-00
3LC-82310-01-00
169,00 EUR
incl. 19% tax excl. Shipping costs
DFS7-6P
TOP
Dynatek CDI DFS7-6P Yamaha Banshee 350 Programmable Tuning CDI Plug&Play from 1997 onwards
Dynatek CDI DFS7-6P Yamaha Banshee 350 Programmable Tuning CDI Plug&Play from 1997 onwards

Includes:
1x Dynatek CDI incl. switch for throttle cam adjustment

Description:
This CDI can be freely programmed (order programming cable).

To be connected like the original CDI

Significant increase in performance and smoother engine running with optimised ignition curve!

Tip:
It is best to order the matching ignition coil at the same time

Fitting instructions:
Fits 1:1 to the original mounting points and plugs

Suitable for:
Yamaha Banshee - From 1997 (With plug modification it fits all Banshees!)

Important note:
CDIs are currently being ordered on a customer-specific basis. Therefore the delivery time is longer than usual.

Picture similar
419,00 EUR
419,00 EUR per Pcs
incl. 19% tax excl. Shipping costs
M27x1
Pole wheel puller Flywheel puller Yamaha Banshee or RD 350
Pole wheel puller Yamaha Banshee or RD 350

Includes:
1x pole wheel puller

Suitable for:
Yamaha Banshee all years of construction
Yamaha RD 350 31k, YPVS, 1WW, 1WX etc.
15,00 EUR
15,00 EUR per Pcs
incl. 19% tax excl. Shipping costs
Programmierkabel_Ignitech-CDI
Programming cable for Ignitech CDI USB / serial adapter cable 9-pin

Programming cable for Ignitech CDI USB / serial adapter cable 9-pin

 

Includes:

1x programming cable

 

Requirements:

  • Mac OS 9.1 and higher.
  • Windows 98SE / ME / 2000 / XP / Vista / 7/8.
  • Linux 2.4 or higher.

Picture similar

20,00 EUR
20,00 EUR per Pcs
incl. 19% tax excl. Shipping costs
RM-Stator
TOP
Base plate Adjustable RM stator Yamaha Banshee ignition plate Alternator base plate
Base plate adjustable RM stator Yamaha Banshee ignition plate alternator base plate

Includes:
1x base plate (adjustable)

Info:
For simple ignition adjustment by turning the base plate. Mounts like the original part.

Suitable for:
Yamaha Banshee all years of construction
35,00 EUR
35,00 EUR per Pcs
incl. 19% tax excl. Shipping costs
Koso_BA004062
KOSO EGT Exhaust gas temperature Velcro version Exhaust gas temperature meter single version BA004062
KOSO EGT exhaust gas temperature Velcro version exhaust gas temperature gauge single version

Scope of delivery:

    - 1x EGT flue gas temperature meter
    - 1x Velcro holder with 3M adhesive surfaces
    - 1x operating instructions
    - 1x temperature sensor (article number: BF000005)
    - 1x extension cable for the sensor Length: approx. 1.25 m
    - 1x current thief
    - 1x clamp 21-38 mm (item number: BI52003) for attaching the sensor to the manifold
    - 1x clamp 40-64 mm (item number: BI52004) for attaching the sensor to the manifold
    - 1x adapter for attaching the sensor to one of the clamps
    - 1x cable for power supply
179,00 EUR
179,00 EUR per Pcs
incl. 19% tax excl. Shipping costs
BF000005
KOSO EGT exhaust gas temperature race sensor BF000005
KOSO EGT exhaust gas temperature race sensor BF000005

Scope of delivery:
1x EGT sensor M5 straight

Application note:
Can be used with the dual EGT BA006001
Can be used with the single EGT BA004062
79,00 EUR
79,00 EUR per Pcs
incl. 19% tax excl. Shipping costs
BF000004
TOP
KOSO EGT exhaust gas temperature sensor BF000004 bent
KOSO EGT exhaust gas temperature sensor BF000004 bent

Scope of delivery:
1x EGT sensor bent

Application note:
Can be used with the dual EGT BA006001
Can be used with the single EGT BA004062
59,00 EUR
59,00 EUR per Pcs
incl. 19% tax excl. Shipping costs
17 to 32 (from a total of 42)
Other accessories - Everything that does not fit into any other category