Yamaha Banshee Parts

Water pump cover gasket Yamaha Banshee / RD 350 - 3GG-12428-01-00 / 4L0-12428-00-00

Not an original part. Seal from the accessories

Suitable for:
Yamaha Banshee (all)
Yamaha RD 350 LC, 31K, YPVS, 1WW, 1WX, 4L0, 4L1

Foot gasket Yamaha RD 350 31k different versions 0.3, 0.5, 0.75, 1mm

Scope of delivery:
1x paper foot gasket

Info:
Narrow sealing surface

Suitable for:
Yamaha RD 350 31k YPVS

A-Arms E-ATV A-ARM 3+3 (+3/+1) black with TÜV certificate for Yamaha Banshee YFZ 350

A-arm set with a total of 6’ (152.4mm) widening and double shock absorber mount.
The front suspension is also moved forwards by 1″ (25.4mm) for more stable directional stability at high speeds. This means +3+1 / side.

Specifications:
1’ (25.4mm) precision chrome-molybdenum (CrMo) steel tubes
3’ (76.2mm) wider per side
Steplessly adjustable camber
aluminium steering rods
Maintenance-free bushes
Two shock absorber mounting options on the wishbones (either normal or low)

Made in Germany

Scope of delivery:
2x A-Arms top
2x A-arms at the bottom
2x track rods (aluminium)
2x rod ends and bushes
Sleeves, bushes, discs and nuts
Parts certificate is enclosed

Delivery time may vary depending on availability. Exact delivery time will be given after ordering.

Info:
Adjustment work is necessary. The aluminium sleeves for installation are included, but must be adjusted to length. This is also used to adjust the caster.

Suitable for:
Yamaha Banshee - all years

Picture similar

Rubber plug water plug gasket Yamaha Banshee cylinder bottom 47X-11355-00-00

Contains:
1x rubber seal (plug)

Info:
For original or Athena cylinder

Suitable for:
Yamaha Banshee all years of construction
 

Kickstarter complete Yamaha Banshee or RD 350 2GU-15620-01-00

Includes:
1x complete kick starter lever

Info:
Not an original part!

Suitable for:
Yamaha Banshee all years
Yamaha RD 350 31K, YPVS, 1WW, 1WX, 4L0, 4L1
 

Clutch basket Chariot Yamaha Banshee and RD 350 set with shock absorber and counter plate 31K-16150-10-00 / 31K-16150-11-00

Includes:
1x complete clutch basket
8x shock absorber
4x screw
1x counter plate (primary drive attachment)

Info:

• Not an original part but equivalent or better
• Can be driven with the original primary drive
• Can be driven with a straight-toothed primary drive
• Up to 8 discs can be used (original 7 discs)
• Kick starter gear with bearing must be taken over from the original clutch basket

Suitable for:
Yamaha Banshee all years of construction
Yamaha RD 350 31K, YPVS, 1WW, 1WX, 4L0, 4L1

Modquad LockUp for Yamaha Banshee RD 350 centrifugal clutch

Includes:
1x complete LockUp with weights
6x screw

Info:
A Lockup is a great part for customised engines. Thanks to the centrifugal force weights, it counteracts clutch slipping, which often occurs with engines over 70hp.

Important note:
A different clutch cover is absolutely necessary for the LockUp or the existing cover must be modified, as it builds up too far and otherwise rests against the cover.

Suitable for:
Yamaha Banshee all years of construction
Yamaha RD 350 31K, YPVS, 1WW, 1WX

Complete O-ring set for Pro Design, Noss, Chariot, Mattoon, Vito's and also fits some other coolheads

Includes:
1x O-ring cylinder head water channel top
2x O-ring water channel bottom left/right
2x O-ring dome top
2x O-ring combustion chamber
10x O-ring cylinder bolts

Info:
Suitable for all common coolheads (not suitable for Athena cylinder head)
Contains high-quality Viton O-rings, no cheap China O-rings

Suitable for:
Yamaha Banshee all years of construction

Cylinder base gasket Cheetah Serval Cub 392, 421, 465 Monoblock Yamaha Banshee RD 350

Includes:
1x foot gasket for monoblock cylinder

Info:
Suitable for all Cheetah monoblock cylinders up to 68mm

Suitable for:
Yamaha Banshee with Cheetah monoblock cylinder all years of construction

Exhaust connector rubber Polini

Includes:
1x connecting rubber

Info:
One side with shoulder due to the different diameter of the bulb to the rear silencer

Suitable for:
Yamaha Banshee all years with FMF, Toomey, Shearer etc.

Lockup clutch cover Vitos lockup clutch cover black with logo

Includes:
1x complete clutch cover
1x Cover in Logo Design

Info:
Lock-up side cover (clutch cover) for Banshee/RD engines: ensures the necessary clearance for lock-up clutches, reliably protects the clutch area and allows quick access for servicing and tuning. Robust design, precise fit – ideal for powerful setups in sports and racing applications.

Suitable for:
Yamaha Banshee all years
Yamaha RD 350 31K, YPVS, 1WW, 1WX
 

Vito's Performance FAT BASTARD exhaust system (InFrame) 1987-2006 Yamaha Banshee CHROME

Includes:
2x Pipes (left+right)
2x silencer
2x connecting pipe
4x O-ring manifold
2x O-ring silencer

Manufacturer Description:
This is a brand new set of Vito's Performance FAT BASTARD exhaust system.
The originals are back! After an almost 8 year break in production, the FAT BASTARD pipes are back in stock.
This design was developed by Vito himself for his racing bikes. These pipes have an enormous top performance and spin to the moon.
Perfect for anyone looking for a pipe for the medium to high rev range with a wide power spectrum.
They work very well with stock machines or 4mm stroker machines.
The pipes have been polished and chrome plated for a shiny finish.
Includes manifold pipes as well as stinger pipes and aluminium silencers
The pipes are fitted with double O-rings which are pushed onto the cylinders so that no leaks occur.

Ready to install for all Yamaha Banshee models from 1987-2006

The carburettors must be readjusted (as with any other exhaust)

Info:
Similar to the Shearer Small Bore exhaust system

Suitable for:
Yamaha Banshee all years

Returns:
Unfortunately, parts that are ordered on a customer-specific basis cannot be returned. The exhaust system comes directly from the USA and is ordered separately for each customer.
Cancellation is only possible within the first 24 hours. After we have ordered the exhaust systems in the USA, cancellations are no longer possible.

Shearer Small Bore Exhaust System (InFrame) 1987-2006 Yamaha Banshee CHROME

Includes:
2x Pipes (left+right)
2x silencer
2x connecting pipe
4x O-ring manifold
2x O-ring silencer


Info:
The carburettors must be readjusted (as with any other exhaust).
Probably one of the best pipes if you are running a +4 engine.

The system can be ordered in 2 variants.

Variant 1 = For use with air filter box
Variant 2 = For use without air filter box. Then with e.g. 2 K&N or foam filters

Simply specify which variant you want when ordering.

Suitable for:
Yamaha Banshee all years of construction

Returns:
Unfortunately, parts that are ordered on a customer-specific basis cannot be returned. The exhaust system comes directly from the USA and is ordered separately for each customer.
Cancellation is only possible within the first 24 hours. After we have ordered the exhaust systems in the USA, cancellations are no longer possible.

Primary drive with straight teeth (original helical teeth)

Includes:
1x clutch basket gear
1x crankshaft gear

Info:
The gears have hardened teeth. There are also some primary drives on the market that are unfortunately of poor quality.
Usually for engines over 70hp and a sensible relief for the crankshaft or the bearings and bearing seat.

Optionally available in 2 possible ratios:
2.86 = standard (plug and play)
2.68 = Longer for customised engines (minimal adjustment necessary)

Compatibility:
Can be driven with all standard clutch baskets (also original)

Suitable for:
Yamaha Banshee all years of construction
Yamaha RD 350 31K, YPVS, 1WW, 1WX

Returns:
Unfortunately, parts that are ordered on a customer-specific basis cannot be returned. The parts come directly from the USA and are ordered separately for each customer.
Cancellation is only possible within the first 24 hours. After we have ordered the parts in the USA, cancellations are no longer possible.

Cylindrical roller bearing TZ Style Bearing reinforced version C3 bearing clearance with ring groove Crankshaft bearing (25x62x17mm)

Includes:
1x cylindrical roller bearing
1x cylindrical roller bearing inner part

Info:
This bearing is a must-have for all those who drive a larger engine or who are travelling on the race track. It relieves the bearing seat in the crankcase and lasts longer.
If possible, the bearing should only be used with a straight-toothed primary drive.

Compatibility:
Can be used with all standard crankshafts. Whether original or +4, +7, +10 etc.
Remove the old bearing and fit the new one.

Installation position:
Right (directly on the primary drive)

Suitable for:
Yamaha Banshee all years of construction
Yamaha RD 350 31K, YPVS, 1WW, 1WX