Driveline Performance Crankshaft Bigbore +10 / rod 115mm Yamaha Banshee und RD 350 Koyo 8 ball bearings

Hotrods Gearbox Bearing Gearbox Bearing Set Yamaha Banshee / RD350

Suitable for:
Yamaha YFZ 350 Banshee 1987 - 2010 (ALL)

Also suitable for:
Yamaha RD 350 YPVS, 1WW, 31K 1WX

 

Driveline Performance Assassin 2 465ccm Zylinderkit

We are now your direct contact for Driveline products in Germany!

Foreword:
With this new development of the Assassin 2 cylinder from Driveline, Driveline goes one better! Compared to the Assassin 1 cylinders, this cylinder set now has a large intake with large Boysen ports. The cylinders also come with special forged pistons with enlarged intake windows. The port design has been fundamentally revised.
This cylinder kit can be pre-ordered from us now.

Scope of delivery:
1x Driveline cylinder kit Assassin 465cc incl. base gasket
2x Wiseco forged pistons (Custom Pistons by Driveline)

Timing:
Exhaust: 196°
Transfer port 129°

Fitting instructions:
Only to be used with a crankshaft with 10mm more stroke and 115mm connecting rod. (64mm stroke)
Nikasil cylinder bore in 68mm

Options:
Alternatively, the cylinder can also be ordered with a grey cast iron liner. Bore size is then 66mm and corresponds to 397cc. A bigbore crankshaft is also required.

Cylinders can be pre-ordered now! We already have sets here, but they still need to be coated in Germany. Therefore, it will be a while before they go on sale.

Compatibility:
Yamaha Banshee 350 Upgrade
Yamaha RD350 Upgrade (note the exhaust flange!) Different to the RD!

The engine housing of the 31k has a narrower sealing surface under the exhaust.
Engine case 1WW and 1WX is the same as the Banshee case

Not authorised for road use. This is a performance upgrade that must be approved by the TÜV.

Engine case Driveline Yamaha Banshee RD350 reinforced version for crankshaft +7 +10 496cc 521cc 72mm Super Cub

Do you need a new engine housing because yours is broken or simply because you are looking for something more stable because of your performance? Are you also planning a conversion to a larger displacement? Then you've come to the right place. The engine case from Driveline is stronger than the original and cheaper than a billet case which is milled from the solid. In addition, it is already prepared for crankshafts with +7mm or +10mm more stroke and spindled for a 72mm bore. The machining is already appropriate for Cheetah Super Cub cylinders.

Includes:
1x engine case
1x upper bolt set
1x lower bolt set

Compatibility:
Like the original

Application note:
For crankshafts with 7mm more stroke
For crankshafts with 10mm more stroke

Suitable for:
Yamaha Banshee all years of construction
Yamaha RD 350 31K, YPVS, 1WW, 1WX